MEDEM
Konica Minolta

508 dpi dry laser imaging

Konica Minolta DRYPRO SIGMA II dry laser imager

DRYPRO SIGMA II is a 50 μm, 508 dpi semiconductor laser imager with thermal development, dual daylight trays and DICOM Print SCP connectivity.

DRYPRO SIGMA II is a dry imager and is not the REGIUS Sigma II CR digitizer. Medem quotes each system by its exact model and configuration.

View specifications

Overview

About DRYPRO SIGMA II

DRYPRO SIGMA II exposes approved film with a semiconductor laser and develops it thermally, eliminating wet processing chemistry.

Its official media is SD-S in 125-sheet cartridges. It must not be confused with the separate REGIUS Sigma II computed-radiography digitizer.

Buyer checklist

What to include in your request

  • Exact product code or equipment model
  • Required size, configuration and quantity
  • Installed imager or DICOM workflow details
  • Destination country and delivery timeline

Features

DRYPRO SIGMA II product highlights

508 dpi output

50 μm pixel pitch supports detailed diagnostic hardcopy.

Dual daylight trays

Two SD-S cartridge sizes can remain loaded for changing workloads.

High throughput

Rated approximately 70 sheets/hour at 14 x 17 and 110/hour at 8 x 10 inches.

DICOM Print SCP

Gigabit Ethernet and DICOM Print SCP support network print integration.

Specifications

DRYPRO SIGMA II technical details

Imaging technologySemiconductor laser exposure; thermal development
Resolution50 μm; 508 dpi
Gray scale14-bit; 16,384 gray levels
ThroughputApprox. 70/hour at 14x17; 110/hour at 8x10 in
Official mediaSD-S, 125-sheet cartridges
Film sizes14x17, 11x14, 10x12 and 8x10 in
TraysTwo daylight trays / two online sizes
Dimensions626 x 649 x 666 mm
Weight79 kg
NetworkGigabit Ethernet; DICOM Print SCP
SourceKonica Minolta sswsu1dn_DRYPROΣⅡBrochure.pdf

Procurement

Quote and supply details

Product referenceKonica Minolta DRYPRO SIGMA II
Order unit1 configured imager
PriceRequest quote
AvailabilityConfirmed by model, format, quantity and destination
Compatibility checkExact product code and installed equipment required
ShippingInternational B2B freight quoted by destination and Incoterms

Compatibility

Official media and model identity

The brochure specifies SD-S film in 125-sheet cartridges. SD-Q, SD-Q2 and SD-E are not presented as compatible. Verify that the requested equipment is DRYPRO SIGMA II, not REGIUS Sigma II.

Use cases

Typical procurement scenarios

Procurement support

Request DRYPRO SIGMA II availability

Send the exact reference, required configuration or format, quantity and destination. Medem will verify compatibility and prepare a tailored B2B quotation.

FAQ

DRYPRO SIGMA II buyer questions

What is the Konica Minolta DRYPRO SIGMA II?

It is a 508 dpi dry laser imager with dual daylight trays, thermal development and DICOM Print SCP.

How can I get a price for the Konica Minolta DRYPRO SIGMA II?

Request a quote with the required configuration, condition, quantity and destination. No numerical price is published because availability and configuration determine the offer.

What must be checked before ordering the Konica Minolta DRYPRO SIGMA II?

Confirm the exact DRYPRO model, configuration, DICOM setup, electrical requirements and SD-S cartridge code. REGIUS Sigma II is a different CR digitizer.

Can Medem arrange international supply for the Konica Minolta DRYPRO SIGMA II?

Yes. Medem confirms configuration, included accessories, documentation, packing and destination requirements in the quotation.